Outdoor surveillance projects often face one difficult question: how do you send network data across long distances when cable deployment is expensive, complicated, or simply not practical? In scenic areas, ports, oil fields, construction sites, rural roads, factory yards, and large outdoor spaces, running fiber or Ethernet cable across every point can slow down the entire project.
The COMFAST CF-E319A V3 is designed for these long-distance outdoor transmission needs. As a 900Mbps 5.8GHz outdoor wireless bridge, it combines a high-performance Qualcomm triple-chip platform, a 26dBi high-gain directional antenna, 26dBm RF power, up to 11km line-of-sight transmission, PoE power supply, 2KV lightning protection, and an engineering-friendly mounting design for surveillance and outdoor network backhaul projects.
Built for Long-Distance Outdoor Transmission
The CF-E319A V3 is made for outdoor wireless transmission projects where a stable point-to-point or point-to-multipoint link is required. It is especially suitable for security camera transmission, remote monitoring, outdoor data backhaul, and network extension in locations where wired deployment is difficult.
With up to 11km line-of-sight transmission distance in open environments, the device helps project teams connect remote surveillance points, monitoring stations, buildings, and outdoor equipment without laying long-distance cables.
900Mbps High-Speed 5.8GHz Wireless Link
The CF-E319A V3 supports IEEE 802.11a/an/ac wireless standards and works on the 5.8GHz band. Its wireless transmission rate reaches up to 867Mbps, making it suitable for high-speed outdoor wireless backhaul and surveillance video transmission.
The 5.8GHz band helps reduce interference from crowded 2.4GHz environments and provides a cleaner transmission path for outdoor engineering applications. For monitoring projects that require smoother video data transfer, this high-speed wireless bridge gives installers a more practical option.
With 900Mbps-class wireless performance and 5.8GHz outdoor transmission, the CF-E319A V3 is designed to deliver stable long-distance links for surveillance and remote network access.
26dBi High-Gain Directional Antenna
Long-distance wireless transmission depends heavily on antenna design. The CF-E319A V3 is equipped with a 26dBi high-gain directional dish antenna, helping focus the wireless signal toward the target receiving point.
Compared with general wireless coverage devices, a directional antenna is better suited for point-to-point transmission because it sends signal energy in a more concentrated direction. This helps improve signal strength, reduce unnecessary interference, and support more stable outdoor links.
Up to 11km Line-of-Sight Transmission
The CF-E319A V3 is designed for long-distance transmission and supports up to 11km transmission distance in open line-of-sight environments. This makes it suitable for projects where cameras, control rooms, monitoring stations, or network access points are far apart.
Actual transmission distance may vary depending on installation height, alignment accuracy, environmental interference, obstacles, and weather conditions. For outdoor engineering projects, correct installation and precise alignment are key to getting the best performance.
26dBm RF Power for Stronger Signal Output
The CF-E319A V3 supports up to 400mW, or 26dBm, transmit power. This stronger RF output helps improve outdoor wireless performance and supports more reliable long-distance signal transmission.
Together with the 26dBi directional antenna and PA power amplifier design, the device is built to support stable wireless bridge operation across open outdoor areas where distance is the main challenge.
Qualcomm Triple-Chip Platform for Stable Performance
The CF-E319A V3 uses a Qualcomm QCA9563 + QCA9886 + YT8531SC chipset platform. This hardware design is built to support stable outdoor wireless bridge performance for long-term engineering use.
It also includes 128MB memory and 16MB flash, providing a practical hardware foundation for outdoor transmission, monitoring backhaul, and bridge networking applications.
PoE Power Supply for Easier Outdoor Deployment
Outdoor bridge installation is often limited by power access. The CF-E319A V3 supports 48V PoE power supply, allowing power and data to be delivered through the Ethernet cable. This helps simplify cabling and makes outdoor installation more flexible.
With one 10/100/1000Mbps LAN/WAN RJ45 Ethernet port, the device can be connected to cameras, switches, recorders, or network equipment depending on the project design.
Industrial Design for Easier Angle Adjustment
Wireless bridges require accurate alignment. The CF-E319A V3 uses an engineering-focused mounting design that allows the bridge to rotate and adjust angle more conveniently during installation.
The product also includes a built-in level indicator to help installers check whether the device is positioned correctly. Signal indicator lights make it easier to adjust the bridge to the right direction, reducing setup difficulty during outdoor deployment.
Designed for Outdoor Stability
The CF-E319A V3 is designed for outdoor working environments. It supports IP65 protection, 2KV lightning protection, and an enclosure made with ABS engineering plastic and aluminum antenna structure.
The product is built to resist sun exposure, high and low temperatures, oxidation, and harsh outdoor conditions, helping maintain 24-hour stable operation for monitoring and transmission projects.
Flexible Working Modes for Different Network Projects
The CF-E319A V3 supports AP, Client, Repeater, and Router working modes. This allows the device to adapt to different outdoor wireless bridge and network extension scenarios.
It also supports WDS, automatic channel selection, transmit power adjustment, SSID broadcast control, wireless security settings, distance settings, channel bandwidth selection, and advanced wireless parameters such as RTS threshold, fragmentation threshold, Short GI, and WMM.
Web Management and Link Monitoring
For project maintenance, the CF-E319A V3 supports HTTP web management, system logs, time and NTP settings, wireless status monitoring, rate testing, and Ping tools. These functions help installers check and manage the bridge link more conveniently.
The system status page can show useful information such as signal strength, noise strength, transmission CCQ, CPU usage, and memory usage, helping maintenance teams understand real-world link quality.
Ideal for Surveillance, Ports, Oil Fields, Construction Sites, and Scenic Areas
The CF-E319A V3 is suitable for outdoor monitoring and long-distance network transmission projects. It can help connect remote cameras, monitoring points, temporary project offices, outdoor equipment rooms, and control centers where cable deployment is difficult.
- Security camera transmission for outdoor surveillance projects
- Point-to-point and point-to-multipoint wireless bridge deployment
- Scenic areas, parks, rural roads, plazas, and open public spaces
- Ports, oil fields, construction sites, and industrial outdoor areas
- Factory yards, warehouses, farms, and remote monitoring points
- Long-distance backhaul where fiber or Ethernet cabling is difficult
- Temporary outdoor network links for engineering and project sites
A Practical Long-Distance Bridge for Outdoor Monitoring Projects
The COMFAST CF-E319A V3 brings together 900Mbps-class 5.8GHz wireless transmission, a 26dBi high-gain directional antenna, 26dBm RF power, up to 11km line-of-sight range, Qualcomm triple-chip performance, 48V PoE power supply, IP65 protection, 2KV lightning protection, and flexible engineering installation.
For outdoor surveillance and long-distance wireless backhaul projects, the CF-E319A V3 provides a strong and practical wireless bridge solution that helps reduce cabling difficulty while keeping transmission stable across challenging outdoor environments.
